How to hack remote computer using IP Address

cybercrime How to hack remote computer using IP Address

Literally, hacking is accessing something or somebody in internet without their permission or interest. While, speaking in summary, hacking is very easy job, it is like instead of using front door, finding the hidden door of a house and hijacking the precious things. Among all the hacking, hacking via IP address is one of the most common yet powerful beginning.

You may want to hack the website and put your advertisement there or grab some database information In this type of hacking, you are playing with the web server’s computer instead of the administrator’s computer. Because, www.website.com is hosted in separate web server rather than personal computer.

Another can be accessing your friend’s computer from your home. Again this is IP based and this is possible only when your friend’s computer is online. If it is off or not connected to internet then remote IP hacking is totally impossible.

Well, both of the hacking has the same process. Let’s summarize what we must do.

  1. Confirm the website or a computer you want to hack.
  2. Find or trace their IP address.
  3. Make sure that IP address is online
  4. Scan for open ports
  5. Check for venerable ports
  6. access through the port
  7. Brute-force username and password
Now let me describe in brief in merely basic steps that a child can understand it.
First, getting the IP address of victim.
To get the IP address of the victim website, ping for it in command prompt.

For example,
ping www.google.com

will fetch the IP address of Google.com

a How to hack remote computer using IP Address

This is how we can get the IP address of the victims website.

How about your friend’s PC? You can’t do www.yourfirend’sname.com, can you? Finding your friend’s IP address is little tough job, and tougher it is if he has dynamic IP address that keeps changing.

One of the widely used method to detect IP address of your friend is by chatting with him.

You might find this article helpful

Now you got the IP address right? Is it online?

To know the online status just ping the IP address, if it is online it will reply.

If the IP address is online, scan for the open ports. Open ports are like closed door without locks, you can go inside and outside easily.

Use Advanced Port Scanner to scan all open and venerable ports.

b How to hack remote computer using IP Address

Now you’ve IP address and open port address of the victim, you can now use telnet to try to access them. Make sure that you’ve telnet enabled in your computer or install it from Control panel > Add remove programs > add windows components.

Now open command prompt and use telnet command to access to the IP address. Use following syntax for connection.

telnet [IP address] [Port]

c How to hack remote computer using IP Address

You’ll be asked to input login information.

d How to hack remote computer using IP Address

If you can guess the informations easily then it’s OK. Or you can use some brute-forcing tools like this one.

In this way you’ll able to hack remove computer using only IP address

You can leave a response, or trackback from your own site.

23 Responses to “How to hack remote computer using IP Address”

  1. Ismail says:

    Please help how I hack any pc using ip address from any where?

  2. Soan says:

    Nice article to learn hacking. The brute force tools link points to a tool which is quite old. I think it was last modified in 2002 as per the web page link.

    Do we have any other good way of getting an insight into DB of a asp.net application if you know a website’s IP address?

    Or are there any softwares which help you find vulnerabilities in a asp.net website?

  3. dheeraj sharma says:

    when i scan through port scanner,i donot get any port open that has a name (telnet) in the bracket

  4. dheeraj sharma says:

    pls help me for the above question

  5. samad lamba says:

    hey i tried bu it saying that cannot connect to the host port 23

    • NeonLightsXD says:

      you dont use 23. you use whatever port they have open, if any. if you have the “use port range list” box checked there should be a list of stuff, and on the left,make sure that the one saying “open” is extanded, that is the port number you type in

  6. Echo says:

    You’re gonna have to do better than this.

  7. just me says:

    same thing happened to me cannot connect to the host port 23

  8. Ameer says:

    Hey, umm, I tried this, and some of the IP Addresses don’t seem to be working.

  9. vips says:

    its not working man i tried but cmd says telnet is unrecognised fi;e or path

  10. sumit says:

    this is an excellent site

  11. thnx says:

    thnx dude, the brute forcing tool is quite old, is there any I can use wich is developed more recent. the website still talks about windows NT and windows 98. which seems to me almost antique. I’m Using windows 7 at the moment. any brute forcing tool you advice me?

  12. bilal says:

    Hey! nice article on hacking a website or a PC. But I think nowadays these techniques are no more alive. There are lot more ways to hack into a someone computre. Yes, getting IP of the vicitm could be the first step. SH1 is better than using Telnet. Also you can hack someone machine through packets or hacking static host.

    How to get an IP?

    If you are chating with him or her. During chat open up CMD (Dos), and type there netstat -n. There will be some local and foriegn IPs displayed. Get the forieng IP after the local host. First 2 or 3 forieng IPs are of local host. After them the forieng IPs will listed. Get very first of them, and go for its tracert or whois. Now go for port scanning. If the port 21 or 20 find open, you can go through it. It means he or she is using router which is open for you. Put that IP address on to address bar of your browser and hit enter. After that you will see a window popups with login and password. Usually routers are configured on the same admin and password which usually are by default. Use brutus or guess yourself. Mostly routers having password “admin” along with the same user name i.e. Admin. Now you hacked an ADSL router. You will see more inforamation about the PC and Internet connection running out there also you can find local host of that machine. Which will be used in further hacking. You can also do ARP attacks by using router properties and can also do port forwarding. :) Happy Hacking.

    bilal

  13. Raidoken says:

    same with me..my cmd says tenet is unrecognised file or patch

  14. Shivanker says:

    Telnet Server has to be activated on the other computer.
    And if “telnet” is not recognized as a command, run cmd as administrator..

  15. Blake says:

    Telnet command does not work? “‘telnet’ is not recognized as an internal or external…”

  16. manish says:

    please help me i wanna hack my girlfriend’s computer

  17. Foysal says:

    i dont find any telenet on windows 7. how can i add this to windows 7

  18. dildar says:

    have this mathed of haking side effect…..for PC

  19. chell says:

    just wanted to say thank you…..job well done explaining step by step!

    BTW this is for “justme” & “samad lamba” the port is NOT always 23, it depends on which port is open. port 23 was used as an example.

  20. Mihailovskii says:

    Telnet must be enabled and in pc what you want to hack ;)

  21. Ricky Zimmermann says:

    Hi all, if u wanna hack some websites its verry hard to do that. Installing telnet is good for getting apache offline, or the most FTP servers are using telnet also, but unsecured.

    Use linux for hacking and not windows is all i can advise

  22. Gking says:

    Honestly, if you’re having problems with this, you shouldn’t be getting into hacking.

Leave a Reply